Industrial Finishing

Industrial Finishing

PSJ Industrial Finishing uses the best quality materials and the latest in paint spraying equipment, which in combination with their in-house expertise offers the best possible finish for every job.

The
Final
Touch

Powder coating is recommended for durability, and can be applied to any metallic material, including aluminium, stainless steel and mild steel, with which it is most commonly associated.

In order to provide the best possible adhesion, all materials are degreased, with additional pre-treatments available when required. The powder is then electrostatically applied to the earthed material forming an even coating. This is then subjected to the correct temperature for a specific length of time, which allows the powder to melt and flow across the component producing a continuous film. This finally cures to form a resiliant coating to a minimum thickness of 50 microns (0.050mm).

In addition to having excellent mechanical properties, powder coating is environmentally friendly as no harmful solvents are used in its application (unlike the conventional 'wet paint' systems). Powder coating fully complies with all the latest global legislation and with a maximum weight loss of only 1%, virtually all the powder is used in the coating process. With conventional 'wet paint' systems having a final weight loss of 40-60%, the powder coating system offers significant savings

Full Range

A full range of powder coating materials is offered by PSJ Industrial Finishing, incorporating:

Hammer
Texture
Leatherette
Smooth
To any required gloss level

Epoxy Powders have excellent chemical resistance and mechanical properties. However slight surface chalking will develop upon exterior exposure. Where high gloss retension, on components for exterior exposure, is required the use of Polyester powder is recommended.

Polyester Powders have excellent chemical resistance and mechanical properties. These powders have been formulated to give hard, durable finishes with very good sunlight and weather resistance properties and are recommended for exterior use.

Epoxy Polyester Powders provide a tough, durable coating with excellent resistance to corrosion and mechanical damage. In common with similar coatings, slight surface chalking will develop after prolonged exterior exposure. Where high gloss retension, on components for exterior exposure, is required the use of Polyester powder is recommended.

Polyurethane Powders provide excellent resistance to mechanical damage and a wide range of chemicals. Their outstanding corrosion resistance, excellent external exposure properties, their superior gloss and flow characteristics make them suitable alternatives to Polyester powders.

In addition to powder coatings, PSJ Industrial Finishing are able to offer the full range of 'wet paint' systems, including single pack epoxy, two pack epoxy, organasol spatter, texture, hammer and stove enamelling.

All powder and wet paint systems for metal finishing are available in over 12,000 standard colours, in any gloss level to BS, RAL, AFNOR, ANSI, Pantone and Munsell reference. A specific colour matching service is also available.

Technical advice and complimentary services offered by PSJ Industrial Finishing include:

Blast Cleaning to SA2.5, SA3 and BS7079

Metal Flame Spray to BS2569

Alocrom 1000 (clear) and Alocrom 1200 (straw) to Def Stan 03-18

Anodising on Aluminium to BS1615

Zinc Plating clear & yellow passivating to BS1706 ZN32C, BS3382 ZN32C, BS1706 ZN31A

Silver Plating to BS2816

PSJ Fabrications Ltd

Contact the PSJ Sales Team who will be pleased to deal with your enquiry.



PSJ Industrial Finishing uses the best quality materials and the latest in paint spraying equipment, which in combination with their in-house expertise offers the best possible finish for every job.	The Final Touch
Powder coating is recommended for durability, and can be applied to any metallic material, including aluminium, stainless steel and mild steel, with which it is most commonly associated.
In order to provide the best possible adhesion, all materials are degreased, with additional pre-treatments available when required. The powder is then electrostatically applied to the earthed material forming an even coating. This is then subjected to the correct temperature for a specific length of time, which allows the powder to melt and flow across the component producing a continuous film. This finally cures to form a resiliant coating to a minimum thickness of 50 microns (0.050mm).
In addition to having excellent mechanical properties, powder coating is environmentally friendly as no harmful solvents are used in its application (unlike the conventional 'wet paint' systems). Powder coating fully complies with all the latest global legislation and with a maximum weight loss of only 1%, virtually all the powder is used in the coating process. With conventional 'wet paint' systems having a final weight loss of 40-60%, the powder coating system offers significant savings

	Full Range
	A full range of powder coating materials is offered by PSJ Industrial Finishing, incorporating:
	Hammer Texture Leatherette Smooth To any required gloss level
	Epoxy Powders have excellent chemical resistance and mechanical properties. However slight surface chalking will develop upon exterior exposure. Where high gloss retension, on components for exterior exposure, is required the use of Polyester powder is recommended.




	Polyester Powders have excellent chemical resistance and mechanical properties. These powders have been formulated to give hard, durable finishes with very good sunlight and weather resistance properties and are recommended for exterior use.
	Epoxy Polyester Powders provide a tough, durable coating with excellent resistance to corrosion and mechanical damage. In common with similar coatings, slight surface chalking will develop after prolonged exterior exposure. Where high gloss retension, on components for exterior exposure, is required the use of Polyester powder is recommended.
	Polyurethane Powders provide excellent resistance to mechanical damage and a wide range of chemicals. Their outstanding corrosion resistance, excellent external exposure properties, their superior gloss and flow characteristics make them suitable alternatives to Polyester powders.

In addition to powder coatings, PSJ Industrial Finishing are able to offer the full range of 'wet paint' systems, including single pack epoxy, two pack epoxy, organasol spatter, texture, hammer and stove enamelling.
All powder and wet paint systems for metal finishing are available in over 12,000 standard colours, in any gloss level to BS, RAL, AFNOR, ANSI, Pantone and Munsell reference. A specific colour matching service is also available.

Technical advice and complimentary services offered by PSJ Industrial Finishing include:
Blast Cleaning to SA2.5, SA3 and BS7079
Metal Flame Spray to BS2569
Alocrom 1000 (clear) and Alocrom 1200 (straw) to Def Stan 03-18
Anodising on Aluminium to BS1615
Zinc Plating clear & yellow passivating to BS1706 ZN32C, BS3382 ZN32C, BS1706 ZN31A
Silver Plating to BS2816