Power 2000
Switchgear and MCC's to 600Volts
	Form 4 Segregation
	ASTA Certified
	Welded Frame Construction
	High Ingress Protection IP55
	Re-configurable Steelwork
	Space Saving Back-to-Back Arrangement
	EMC Cubicles (optional)

A versatile fully engineered Motor Control Centre with facilities for fixed or withdrawable starters, distribution and control aspects, specifically designed for safe use in harsh industrial environments.

General Features

Each cubicle is horizontally divided, for compartment sizing, into Space Units (SU), the smallest size being 2SU and each compartment being in multiples of 80mm.

Cubicles are available in heights of 1760mm; 18SU (low height), 2000mm; 21SU (medium height), 2240mm; 24SU (full height). Depths available are 500, 724 and 917mm, the latter dimension being suitable for a back to back configuration. The main frame is fully welded for strength and rigidity, with doors, shelves and mounting plates bolted in position (with single side access) for re-configuration and modification work. Power 2000 is manufactured in 2mm and 3mm quality steel throughout.

Safety vents are provided in each load compartment to expel and cool gases in the event of fault conditions.

The doors utilise plated and bushed hinges that allow a wide opening angle (minimum 140 degrees) and positive closure on to the fully gasketted door surround. Removable full height covers are provided at the rear of each cubicle, all doors and covers being dished for positive alignment to retain the high degree of ingress protection. Covers and doors have shaped key latches and covers have additional location brackets for ease of fitment.

Corner units, in-built desks, wedge shapes and customised designs are also available.

Incoming Supply
All types of incomers are provided for, these being:
Plain Bus Terminals	MCCB
On-load Isolator	Air Circuit Breaker
Fuseswitch	Alternator Plug
all complete with instrumentation and metering.

Starters
The MCC has been specifically designed to accomodate all the more usual types of starting such as:
Direct On Line	Star/Delta
Stator/Rotor	AC Variable Speed
In addition, other types of starting can be utilised, these include:
Auto-transformer	Primary Resistance
Solid State	DC Drive
Synchronous	S/D Closed Transition
all designed to IEC 947-4-1 Type 2 co-ordination for no damage to components, under fault conditions.

Distribution

In addition to controlling electrical machines, the design has facility to distribute supply, with use of either fuseswitches or circuit breakers, the smaller current ratings being catered for in the Compact arrangement. Local distribution for lighting and auxiliary supplies can also be provided.

Control Systems

Extensive control packages can be provided, with integrated software PLC systems, the MCC having purpose designed cable and trunking ways for interconnections.

Refinements such as glazed panels and mimic diagrams can be readily accomodated.

Specifications			Finishes (std. colours, others available)
Design	EN60439-1, BS5486 Part 1		Exterior Steelwork	RAL 7032 Flint Grey
Segregation (other available)	Form 4		Mounting Bases	White
Certification	ASTA		Gland Plates	Passivated Zinc
Ingress Protection	BS EN 60529 IP55 Certified

Busbar and Droppers (ratings up to 600V, 35°C average ambient, other ratings available)
Fault withstand kA/second	20/1	50/1	50/3
Busbar and Stub Droppers, each in segregated compartment, Amps	400, 600	800, 1150, 1400	1700, 1950, 2350, 2800, 3200
Droppers, each in segregated compartment, Amps	400, 600	800, 1150	1700
Busbar, stub and dropper material	BS 1432 C101 high conductivity copper (tinned bars also available)
Power system type	TP or TP and N, neutral half rated above 1400A (dropper) and 1700A (busbar) Air insulated with glass reinforced polyester DMC support mouldings. (secondary insulation sleeving also available)
Earth bar	Sized for system current & fault level

Busbar and Droppers (all dimensions in millimetres)
General Access	Front and rear access Front access only Back to Back (double fronted, depth 917)
Cable Entry	Rear, Top or Bottom Front, Top or Bottom
Height (plinth available)	2240 (24 Space Units, 1SU = 80mm) 2000 (21SU), 1760 (18SU)
Depth	724 Standard 500 and 917 also available
Width	300	600	900
Configuration Widths	Cable-way	1x600 2x300 (Compact) 1x300+300 Cableway	1x900 2x450 (Compact) 1x600+300 Cableway 1x300+1x600
	1200, 1500, 1800
	Single/Double Door Large Starter or PLC/Marshalling Cubicle

Process Control MCC, with central control section. each starter compartment has Form 4 segregation and IP55 ingress protection. Designed for safety. Click on the image to enlarge photograph.

Prices and Information

For the current price schedule, technical and delivery information, contact our Sales TeamWho will be pleased to deal with your enquiry.