|
Low Voltage Products |
|
|
|
An extensive package of control equipment engineered with experience and technology integrated to provide system control for industry. |
|
|
|
|
|
|
|
Low Voltage Products |
|
|
|
An extensive package of control equipment engineered with experience and technology integrated to provide system control for industry. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Types - |
Direct on Line |
Star / Delta |
|
Stator/Rotor |
S/D Closed Transition |
|
|
Auto Transformer |
Primary Resistance |
|
|
Solid State ('Soft') |
AC Variable Speed |
|
|
Synchronous |
D.C. Drive |
|
|
|
||
|
Enclosure - |
Wall or floor fixing for interior or exterior use, with environment protection to IEC 144 specified for the application, with purpose designed circuitry and controls. |
|
|
|
||
|
|
|
|
|
Specifically designed with appropriately interlocked isolator or fuseswitch, feeding on to a bus bar or splitter section, from which the individual starters are supplied. The example shown is a double door unit, each door enclosing an 8 motor panel with control circuit transformer and control relays. Each mootor has a co-ordinated set of main fuses, contactor and overload relay, with marshalled rear terminals. |
|
Such panels may be top or bottom cable entry, normally front access only, with outgoing motor connections marshalled or with individual glanding arrangement. |
|
|
|
|
|
|
|
|
|
Individual starter and control compartments, each with fuseswitch or MCCB isolator. |
|
Incoming section may include metering or instrumentation and isolator, fuseswitch or circuit breaker incorporating protection circuits. |
|
|
Busbars rated for the load and braced to withstand the fault level of the system. |
|
|
Distribution circuits can be provided with either fuseswitches or circuit breakers to make the board the control centre of the system. |
|
|
|
|
|
These outstanding features are available on Motor Control Centres From Igranic: |
|
|
|
|
|
To IEC144, IP54 |
|
|
Top or Bottom Cable Entry |
|
|
Reconfigurable Steelwork |
|
|
Stainless Steel captive bolts on covers |
|
|
Full Compartment Segregation to BS5486, 1986 (IEC439-1) Form 4 |
|
|
Wall or Floor Fixing |
|
|
Full or Low Height |
|
|
Double Facia, Weatherproof |
|
|
|
|
|
|
|
|
Co-ordinated Protective Systems |
|
|
Type Tested |
|
|
|
|
|
|
|
|
Fully Compartmented |
|
|
Fault Withstand 100kA/1 second or 50kA/3 seconds |
|
|
KEMA and ASTA Certified |
|
|
Phase Segregated Secondary Iinsulation |
|
|
Single Side Access |
|
|
|
|
|
|
|
|
Fully Insulated |
|
|
Shuttered Connection Positions (draw-out starters) |
|
|
Fully Shielded, with earthed steel, connection positions (fixed base starters) |
|
|
Fault Withstand 80kA/1 second |
|
|
|
|
|
|
|
|
Complete Range of Types (See Starters List) |
|
|
Test Facility, Off Load |
|
|
Fixed Base Type With De-mounting Provision |
|
|
Draw-out Type With Mechanical Alignment Feature |
|
|
Stable Drawn Out Inspection Position |
|
|
Fuseswitch or MCCB Isolators |
|
|
|
|
|
|
|
|
To IEC292-1A Type C, Certified for No-damage to Components |
|
|
|
|
|
|
|
|
To AS 1136, Certified to Withstand Arcing Faults on the Load Side of the Protective Device |
|
|
Segregation to BS5486, 1986 (EN60 439-1) Form 4 |
|
|
|
|
|
For the current price schedule, technical and delivery information, contact our Sales TeamWho will be pleased to deal with your enquiry. |
